DCN-NG Pluggable Microphone
The DCN-MICS and DCN-MICL are unidirectional microphones
with an adjustable stem for use with DCN-IDESK-L Interpreter
desk, Concentus and flush mount units.
Specify Part
Number
DCN-MICS
DCN-MICL
shown installed
in DCN-IDESK-D
Features
•
•
•
•
•
•
•
•
Unidirectional microphone
Adjustable stem
Combines high acoustic quality and good sensitivity with low sensitivity
Built-in plop and windshield
Slim and attractive design
Fast and reliable connection is assured via the 6-pole connector
Low susceptibility to cell phones
2 color mic ring indicator, red (mic on), green (request to speak)
Specifications
Using a clamp on floor or table stand. Red light emitting light ring around
the microphone head
Controls and Indicators
Interconnection
Performance
6-pole connector
Sensitivity
Nominal level at 85 dB SPL, max level 110 db SPL at < 3% THD
Frequency response
Transducer type
Directional pattern
Equivalent noise level
SNR
100 Hz – 16 kHz
electret
cardiod
24 dB (A)
60 dB
Physical characteristics
Stem length
DCN-MICS 12.2 in. (310 mm), DCN-MICL 18.9 in. (480 mm)
DCN-MICS 0.24 lbs. (110 g), DCN-MICL 0.28 lbs. (125 g)
Weight
Mounting
Color
6-pole mini XLR connector
Silver
Listen Technologies Corporation
8535 South 700 West, Suite A
Sandy, UT 84070-2515 U.S.A.
Phone: 1.801.233.8992 or 1.800.330.0891
Fax: 1.801.233.8995
Don't miss a single sound.
Email: info@ListenTech.com
updated 06.24.05
Listen® and the Listen logo are registered trademarks of Listen Technologies Corporation
|
KRK Headphones KNS6400 User Manual
Krups Coffeemaker KP1000 User Manual
Lasko Electric Heater 5841 User Manual
Leviton Switch 47693 ESM User Manual
Logitech Mouse 622908 1403 User Manual
Magnadyne Portable DVD Player MV DVD PL7 User Manual
Manitowoc Ice Ice Maker K00347 User Manual
Masterbuilt Fryer 20020107 User Manual
Metabo Cordless Drill Cordless Drills Screwdrivers User Manual
Metra Electronics Power Screwdriver 95 2004 User Manual