LST Smoke Alarm WMSTR WR P01 User Manual

Strobe

WMSTR-WR-P01, WMSTR-WR-P02

• ADM loop technology with

System Sensor/200 protocol

• Long lifetime of strobe due to the use

of LEDs

• Low power consumption

• Versions with or without integrated

dual-isolator available

• Various base types available –

IP24, IP44, IP65

Description

The loop powered strobe is ﬁtted into a round, red plas- ting. For this purpose a special base is needed. Various

tic case. It is powered and actuated as a module via the base types for protection classes IP24, IP44 or IP65

ADM loop with System Sensor/200 protocol.

are available, depending on the application. An optional

mounting plate can be supplied for surface mounted

The address of the strobe is selected with two decadic cabling.

rotary switches located at the bottom of the device.

The strobe is available in two different versions: With or

The strobe is designed for indoor or outdoor wall moun- without integrated dual-isolator module.

Speciﬁcations

Operating voltage

Flash frequency

Ambient temperature

Dimensions ø × H

Weight

Supply through loop voltage

1Hz

-25°C to +70°C

112 × 37 (mm) (incl. base LPBW)

80g

red

Colour

Building Safety. Building Security.

WMSTR-WR-P0x_DBL_LST_EN_0804.PDF • PAGE 1