LCD TV
OWNER’S MANUAL
LCD TV MODELS
19LS4D
32LG30
32LG32
37LG30
42LG30
42LG32
*
**
**
**
**
**
22LS4D
*
32LG20
37LG20
42LG20
19LG30
22LG30
26LG30
**
**
**
**
**
**
32LG5
***
37LG50
42LG50
47LG50
52LG50
**
**
**
**
Please read this manual carefully before operating
your TV.
Retain it for future reference.
Record model number and serial number of the TV.
Refer to the label on the back cover and quote this
information.
Trade Mark of the DVB Digital Video
Broadcasting Project (1991 to 1996)
To your dealer when requiring service.
ID Number(s): 5499: 22LS4D-ZD
5507: 19LS4D-ZD
Extended Owner’s Manual that contains advanced fea-
tures of these LG TV-sets is located on CD-ROM in
electronic version.
5629: 32LG2000-ZA
5630: 37LG2000-ZA
5721: 26LG3050-ZA
5631: 42LG2000-ZA
5088: 19LG3000-ZA
5080: 26LG3000-ZA
5087: 37LG3000-ZA
5090: 22LG3000-ZA
5089: 32LG3000-ZA
5086: 42LG3000-ZA
To read it You need to open chosen files by using
5085: 32LG5000-ZA
5084: 37LG5000-ZA
5083: 42LG5000-ZA
5082: 47LG5000-ZA
Personal Computer (PC) equipped with CD-ROM drive.
5081: 52LG5000-ZA
5385: 52LG5010-ZD
5386: 47LG5010-ZD
5387: 42LG5010-ZD
5388: 37LG5010-ZD
5389: 32LG5010-ZD
5390: 52LG5020-ZB
5391: 47LG5020-ZB
5392: 42LG5020-ZB
5393: 37LG5020-ZB
5394: 32LG5020-ZB
5395: 52LG5030-ZE
5396: 47LG5030-ZE
5397: 42LG5030-ZE
P/NO: MFL34441652 (0901-REV01)
Printed in Korea
5398: 37LG5030-ZE
5399: 32LG5030-ZE
5671: 32LG5700-ZF
5820: 19LG3050-ZA
5818: 22LG3050-ZA
5879: 19LG3060-ZB
5880: 22LG3060-ZB
5878: 32LG5600-ZB
6511: 42LG3200-ZA
■
Image shown may differ from your TV.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Antenna Connection
1
ANTENNA IN
3
Power Cord
PCMCIA
EJECT
ANTENNA IN
AUDIO IN
(RGB/DVI)
CARD SLOT
HDMI/DVI IN
AV 1
AV 2
RS-232C IN
RGB (PC) IN
(CONTROL & SERVICE)
COMPONENT IN
VIDEO AUDIO
Y
PB
P
R
L
R
SERVICE
ONLY
AV 1 AV 2
VCR Connection
2
2
DVD/STB
External equipment Setup
SAFETY INSTRUCTIONS
• Please read these safety precautions carefully before using the product.
• In this manual, the illustration may be somewhat different from your product because it is just example to help the instruction.
If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death.
PrecWaAuRtNiIoNGn in Installing the Product
If you ignore the caution message, you may be slightly injured or the product may be damaged.
CAUTION
CAUTION
Protect the power cord from physical or mechanical
WARNING
abuse, such as being twisted, kinked, pinched, closed in
a door, or walked upon. Pay particular attention to plugs,
wall outlets, and the point where the cord exits the
appliance.
Keep away from heat sources like electrical heaters.
- Electrical shock, fire, malfunction or deformation may occur.
Precautions in Moving the Product
WARNING
Do not use the product in damp place such as a bath-
room or any place where it is likely to get wet.
- This may cause a fire or could give an electric shock.
Make sure to turn off the product.
Make sure to remove all cables before moving the
product.
If you can smell smoke or other odors or hear a strange
- You may be electrocuted or the product can be dam-
sound unplug the power cord and contact the service
aged.
center.
- If you continue to use without taking proper measures, elec-
trical shock or fire can occur.
CAUTION
Do not shock the product when moving it.
- You may be electrocuted or the product can be damaged.
CAUTION
Make the panel face forward and hold it with both
hands to move.
Install the product on a flat and stable place that
has no risk of dropping the product.
- If you drop the product, the damaged product can cause elec-
tric shock or fire. Contact with the service center for repair.
- If the product is dropped, you may be injured or the
product may be broken.
Precautions in Using the Product
WARNING
Keep the product away from direct sunlight.
- The product can be damaged.
Do not disassemble, repair or modify the product at
your own discretion.
- Fire or electric shock accident can occur.
- Contact the service center for check, calibration or
repair.
Do not place the product in a built-in installation
such as bookcase or rack.
Electrical P-oVewnteilatrionRreequliraedt. ed Precautions
To reduce the risk of fire or electric shock, do not
expose this apparatus to rain or moisture.
ApparCatuAsUsThaIlOl nNot be exposed to dripping or
splashing and no objects filled with liquids, such as
vases, shall be placed on the apparatus.
WARNING
Make sure to connect the power cable to the ground-
ed current.
Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
- You may be electrocuted or injured.
damaged in any way, such as power supply cord or plug
is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normal-
ly, or has been dropped.
Do not touch the power plug with wet hands.
Additionally, it the cord pin is wet or covered with
dust, dry the power plug completely or wipe dust off.
- You may be electrocuted due to excess moisture.
Do not keep a still image on the screen for an
extended period (e.g. by pausing a video) as the fixed
image may remian visible on the screen. This is known
as image burn. Image burn is not covered under the
manufacturer’s warranty.
During a thunder or lightning storm, unplug the
power cable or signal cable.
- You may be electrocuted or a fire can break out.
PREPARATION
FRONT PANEL CONTROLS
■
Image shown may differ from your TV.
■
If your TV has a protection film attached, remove the film and then wipe the TV with a polishing cloth.
LCD TV Models :
32/37/42LG20 , 26/32/37/42LG30 , 32/42LG32 , 32/37/42/47/52LG5
**
**
**
***
P
PROGRAMME
VOLUME
+
-
Intelligent Sensor
Adjusts picture according to
the surrounding conditions.
OK
OK
(32/37/42/47/52LG5
only)
***
MENU
MENU
INPUT
POWER
INPUT
Remote Control Sensor
Power/Standby Indicator
• illuminates red in standby mode.
• illuminates blue when the TV is switched on.
Power Indicator
Note: You can adjust
in the OPTION menu.
LCD TV Models : 19/22LG30
**
MENU
VOLUME
PROGRAMME
INPUT
OK
INPUT MENU OK
-
+
P
LCD TV Models : 19/22LS4D
*
MENU
VOLUME
PROGRAMME
POWER
INPUT
OK
Remote Control Sensor
• illuminates green when the TV is switched on.
INPUT
OK
VOL
PR
/I
MENU
Power/Standby Indicator
• illuminates red in standby mode.
PREPARATION
BACK PANEL INFORMATION
A
Image shown may differ from your TV.
2
3
4
1
13
COMPONENT
IN
OPTICAL
DIGITAL
AUDIO IN
(RGB/DVI)
USB IN
AV 1
AV 2
AUDIO OUT
SERVICE ONLY
10
5
HDMI/DVI IN
2
RGB IN (PC)
1(DVI)
RS-232C IN
(CONTROL & SERVICE)
ANTENNA IN
Except for
32/37/42LG20 ,
**
5
6
7
8
9
32/42LG32
**
9
10
5
2
S-VIDEO
PCMCIA
EJECT
ANTENNA IN
AUDIO IN
CARD SLOT
HDMI/DVI IN
(RGB/DVI)
AV 1
AV 2
11
RS-232C IN
RGB (PC) IN
(CONTROL & SERVICE)
COMPONENT IN
VIDEO AUDIO
AV IN 3
H/P
Y
P
B
P
R
L
R
12
SERVICE
ONLY
7
8
6
13
4
1
8
Power Cord Socket
Component Input
This TV operates on an AC power. The voltage is
Connect a component video/audio device to
these jacks.
indicated on the Specifications page. Never
attempt to operate the TV on DC power.
9
10
Antenna Input
2
3
RGB/DVI Audio Input
Connect RF antenna to this jack.
Connect the audio from a PC or DTV.
PCMCIA (Personal Computer Memory Card
DIGITAL AUDIO OUT OPTICAL (Except for 19/22LS4D )
*
International Association) Card Slot
Connect digital audio from various types of equipment.
(This feature is not available in all countries.)
Note: In standby mode, these ports do not work.
11
Audio/Video Input (Except for 19/22LS4D )
*
4
5
Euro Scart Socket (AV1/AV2)
Connect audio/video output from an external
device to these jacks.
Connect scart socket input or output from an
external device to these jacks.
S-VIDEO (Except for 19/22LS4D , 32/37/42LG20 ,
*
**
32/42LG32
)
**
HDMI Input
Connect S-Video out from an S-VIDEO device.
Connect a HDMI signal to HDMI IN. Or DVI (VIDEO)
12
13
signal to HDMI/DVI port with DVI to HDMI cable.
Headphone Socket (Except for 19/22LS4D
,
*
32/37/42LG20 , 32/42LG32
**
)
**
6
7
RGB IN (PC)
Connect the headphone plug to this socket.
Connect the output from a PC.
SERVICE ONLY PORT
RS-232C IN (CONTROL & SERVICE) PORT
STAND INSTALLATION
(LCD TV Models: 32/37/42LG20 26/32/37/42LG30 32/42LG32 , 32/37/42LG5
)
***
**,
**,
**
A
When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully, the
product can tilt forward after the product installation.) If you tighten the bolt with excessive force, the bolt
can deviate from abrasion of the tightening part of the bolt.
Carefully place the TV screen side down on a
Assemble the TV as shown.
1
3
cushioned surface to protect the screen from
damage.
Fix the 4 bolts securely using the holes in the
back of the TV.
Stand Body
Assemble the parts of the
with
4
2
Cover Base
the
of the TV.
Stand Body
Cover Base
(Only 19/22LG30 )
**
Stand Body
Cover Base
Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.
1
2
STAND BODY
COVER BASE
STAND BODY
Assemble the parts of the
with
of the TV. Insert the
into a
COVER BASE
until clicking sound.
Assemble the TV as shown.
PREPARATION
STAND INSTALLATION
DETACHING STAND
(Only 19/22LS4D )
*
(Only 19/22LS4D )
*
■
Image shown may differ from your TV.
Place the tv with its front facing downward on a
Carefully place the TV screen side down on a
1
1
2
cushion or soft cloth.
cushioned surface to protect the screen from
damage.
Cover Base
Pull the
backward during pressing
2
Stand Body
a button on the
.
Hinge Body
Hold the
and bend it upward.
Hinge Body
Cover Base
Hold the
and pull with shake it
3
4
Stand Body
backward to separate from the
.
Stand Body
Insert the
sound.
into the TV until clicking
3
Stand Body
Hold the
and bend it upward.
Stand Body
Stand Body
Assemble the parts of the
with
4
Cover Base
the
of the TV.
Pull stand body to separate from the TV during
pressing 2 latches.
5
Cover Base
|